We're here to help.

Butterfly 2.22 - iOS

Release Notes

This release contains new functionality, bug fixes and performance improvements.

If you have any questions or need support, visit support.butterflynetwork.com. Thank you for being part of the Butterfly community!

Known Issues

  • TeleGuidance calls sometimes don't work when initiated. Exiting and reentering the call can resolve the issue.

  • A "normal" (higher energy) setting for obstetrics is not currently available for iQ+. The "low" setting has been validated as producing diagnostically acceptable images. Switching to "normal" in the obstetrics preset will not increase the energy at this time.

  • Probe updates may fail when the mobile device's battery is below 10%.

  • After moving the Sample Volume in Pulsed Doppler mode, the trace may not always restart

  • If screen goes to sleep while scanning, probe connection will be lost and will need to be unplugged then replugged to establish connection again. Update device screen auto-lock to a longer time or “Never” to avoid.

  • After adding a label and leaving in its default position, tool bar may become distorted while adding calculations.

  • After adding a zone while using a protocol on a Human/Vet org, if the added label is left in its default position before a capture or recording, then the toolbar may become distorted.

Not all presets, imaging modes and features are available everywhere. Check for availability in your country.

Was this article helpful?
0 out of 0 found this helpful
Thank you for your feedback

We’re sorry this didn’t answer your question. We’re here to help. Contact us