We're here to help.

Using Probe buttons on the Butterfly iQ3

The Butterfly iQ3 probe has three buttons: the center (middle) button, the up button and the down button. Pressing the center button will behave in the same way as the button press on the Butterfly iQ/ iQ+, i.e. it will either capture a still, start-stop recording, or unfreeze an image. The other two buttons (the up and down buttons) will either adjust depth, adjust gain, or change modes. This setting can be configured during probe setup or from within the preferences menu.

To configure this setting from the preferences menu:

  1. Ensure you are using the latest version of the Butterfly iQ app.
  2. In the Butterfly iQ app, select your avatar on the bottom right of the toolbar to access your profile.

  3. Select “Preferences”, then select “Probe button actions“.

  4. Under “UP & DOWN BUTTON ACTION“ select one of the following options:

    1. Adjust depth
    2. Adjust gain
    3. Change mode
Was this article helpful?
1 out of 1 found this helpful
Thank you for your feedback

We’re sorry this didn’t answer your question. We’re here to help. Contact us