We're here to help.

Identify Model of Butterfly Device

 

To identify the model of your probe:

  1. Refer to the serial number on the back of your device. This will start with a (21)B, followed by a T, N or V.
    • 202208_Probe_Model_image.png
  2. Once you’ve identified your serial number, use the following table to identify your model:

Serial Number Contains

Model and Cable Details

BT

iQ+, removable cable

BN

iQ, non-removable cable

BV, iQ+Vet

iQ+ Vet, removable cable

BV, iQ Vet

iQ Vet, non-removable cable

KB

iQ3, removable cable

 

To identify the model of your charger:

  1. The iQ, iQ+, and iQ3 chargers are shown in Figure 1.
  2. The underside of the charging unit has product information including a Wireless Charger Model number. 
  3. Additionally, you can identify i! and iQ+ charger pad model you have by its design. 
    • The latest Butterfly iQ/Butterfly iQ+ charger has a matte black finish and curved probe cradle. Earlier versions have a glossy finish with a curved probe cradle or are flat with the blue Butterfly logo at the center.
IQ IQ+ IQ+ iQ3

Not all presets, imaging modes and features are available everywhere. Check for availability in your country.

Was this article helpful?
12 out of 15 found this helpful
Thank you for your feedback

We’re sorry this didn’t answer your question. We’re here to help. Contact us